This Is The Ugly Truth About Electric Fireplace Wall Hanging
Electric Fireplace Wall Hanging Ideas
The wall-mount electric fireplaces are ready to go right out of the box. These electric fireplaces are ideal for adding ambiance to your home without the need for remodeling or venting.
However, they usually require careful installation because they're typically heavy. Follow these steps to hang your new electric fireplace correctly.
1. Connect the Brackets
A wall-mounted or recessed electric fireplace instantly enhances the appearance of any room. It's the ideal solution for homes that don't have an existing fireplace opening or for apartment residents.
Choose where you'd like to place your electric fireplace. It is best to choose a location that isn't susceptible to moisture, and at least at least a few feet away from furniture and drapes. Once you've located the perfect spot, mark the wall with markings for the top and bottom plates of the fireplace frame.
Use a drill or similar tool to make exploratory holes in the wall. Find studs using a stud-detector. Mark the drywall according to the location of the brackets for mounting your fireplace. Next patch and paint the drywall, or make the wall a bit bigger to prepare it for the fireplace installation.
Depending on the wall-mounted fireplace you select, you might require the installation of both the screen and firebox in one unit, or separate them with a wall bracket. If you're not sure about your ability to finish this project, hire a general contractor or an experienced carpenter.
The majority of electric fireplaces come with an installation template to aid in the procedure, but you must also have a spirit level and pencil to help accurately mark the spot where you'll fix the wall brackets. Before drilling, use the template to ensure that the power cable of the fireplace can reach from the place of installation to an outlet nearby for a convenient plug in.
Once the studs and the fireplace frame are in place, you can then install a drywall that is as smooth and flush as you can to give a neat appearance. Add a piece of trim to the bottom edge and then sand and paint the entire frame to give it a finished appearance.
You'll need to insert the slots or hooks on the back of the majority of electric fireplaces mounted on walls into the brackets that mount them. Be sure to make sure that the slots or hooks are aligned before connecting the brackets for your fire. Once the fire is set you can then add additional elements like driftwood logs, crystal embers, or decorative rocks.
2. Check the Bottom Bracket
The space above a fire mantel, chimney breast, or mantel is a prime spot for hanging artwork. There is a delicate balance between an artistic arrangement and one that does not detract from the overall look of the fireplace.
A common rule is that a photograph should cover at least 80% of the width of the fireplace or mantel it sits over. This will ensure that it is proportional and will make it look nice on the wall. Other ornaments & decorative items placed on the mantel could affect the size and proportional guidelines.
If you're going to hang a photo above your fireplace, it's important that the frame is made of glass or other material that can withstand high temperatures. If you're unsure then a quick test using a heat-sensitive cloth should reveal whether the frame is suitable for this kind of application.
The possibility of destroying artwork through smoke and hot stray heat is a typical concern when displaying pictures over a fireplace. While this is not a huge issue with a traditional wood or gas-powered fireplace, it's worth checking the recommendations of the manufacturer if you're contemplating using an electric fire that is wall-mounted.
The majority of electrical fires come with a mounting bracket that can be fixed to the wall using hanging screws or wall-mounted fixing systems. It is recommended to make an exploratory hole in an area that is distinct from the wall prior to mounting your electric fire. You can then utilize a pipe and cable finder to ensure that there aren't any cables or pipes close to the location where you want to mount your fire.
If you have a problem there are, you may decide to put your fire on top of the electrical socket, or move it to a new location. If you decide to move it, make sure that the power cable is able to reach the electrical socket. This is essential for older homes or homes with walls that are solid. In the event that it doesn't, your electric fire won't be able to work properly. Some models include an outline of the locations to drill holes, while others require a spirit level and pencil to mark the locations on your wall.
3. Connect the Power Cord
If you've installed a recessed electric fireplace, you might need to move the plug socket from the wall to behind the fireplace. This can create a sleeker look. Test the fireplace first to ensure it functions properly.
A third popular way to install an electric fireplace is to frame space and incorporate it into the wall. This gives a finished traditional look, and also allows you to add mantels. The owner's guide for your particular model will give specifics regarding framing, wiring and securing the fire.
When you're ready to mount your new wall-mounted electric fireplace, start by marking the area of installation with a pencil or marker. Then, use a carpenter's level to make sure that the area of installation is flat and level. You can also employ a stud locater to mark the location of studs, so that you are sure that you're drilling in a safe area.
Make use of your electric drill after you've marked the installation area to create holes for the bracket screws or hanging screws. Follow the steps in the owner's guide to this step. This is particularly important if you are installing the fireplace in drywall. If you're unsure of what to do, you can ask an expert for assistance.
A cable organizer kit can be used to conceal power cords. These kits typically include clips, sleeves or boxes to bundle cables. You can use fish tape or wire snakes to guide the cables. If you don't want to cut into the drywall, a powerbridge kit can provide a more secure and more secure connection.
You can also camouflage cords using paintable wire covers or by tacking them to the wall. Keep Electric wall mount fireplace or tacks away from sources of heat. This will prevent accidental contact and protect the cord.
4. Connect the adapter
A wall-mounted electric fireplace is an excellent option for a home renovation or for those who do not have the space or the money to put in a gas fireplace. They are easy-to-hang and are ready to use straight out of the box. They are a great alternative for those who want a stylish, modern touch or warmth from a fire. They can be hung on any wall, just like artwork, and they're powered by a fan to provide heat.
Before beginning the actual installation process it is recommended to gather all the equipment and tools you will need. You can find the complete instructions on how to install an electric fire in the user manual. Certain models may require you to screw the brackets directly to the wall, while others may include an installation plate that slides into slots or hooks on the brackets for mounting. It is important to remove all combustible material from the area in which you will be installing a recessed unit. As a rule of thumb, these materials should be kept at least 3 feet from the front of the fireplace and 1.5 feet from its sides.
After you have checked all parts, plug in your electric fire and verify that it's working. This is a crucial step, as it will ensure that the flame effect screen and heater work as intended. This will also give you an idea of how the finished product will look in its final location.
Cover the cord after you are satisfied that it is working properly. This will keep the finished product neat. This can be achieved by installing a new outlet with the cord that is hidden behind the unit. This will give your fireplace a seamless look.