15 Electric Fireplace Wall Hanging Bloggers You Must Follow
Electric Fireplace Wall Hanging Ideas
The wall-mount electric fireplaces can be put to use straight out of their box. These fireplaces can be a great way of adding ambiance to your home without the need for renovations or venting.
However, they typically require care in installation due to the fact that they're typically heavy. Follow these steps to hang your brand new electric fireplace properly.
1. Connect the Brackets
A wall-mounted electric fireplace or recessed electric fire instantly transforms any room. This is an excellent option for those who don't have a fireplace or reside in apartments.
Decide where you want to place your electric fireplace. It is best to choose a location that isn't susceptible to moisture, and at a minimum, just a few feet from furniture and drapes. Once you've located the perfect spot you like, mark the wall with lines for the top and bottom plates of the fireplace frame.
Use a tool, such as a drill to make exploratory holes into the wall, examining for studs with a stud detector, and then marking the drywall for fireplace mounting bracket locations. Next, build out the wall or patch and paint the drywall to prepare it for your fireplace installation.
Depending on the wall-mounted fire, you might be required to install the screen and firebox as one unit or separate them with a wall bracket. If you're unsure about your ability to handle this task on your own, think about hiring an experienced general contractor or carpenter.
The majority of electric fireplaces come with an installation template to aid in the process, but you should also have an emery board and a pencil handy to help you precisely mark the location where you'll fix the wall brackets. Before drilling, make use of the template to verify that the power cable of the fireplace can reach from the place of installation to a nearby outlet to plug it in.
Once the studs and fireplace frame are in place, you can put in the drywall as seamless and flush as is possible for a clean appearance. Add a piece of trim to the bottom of the frame, and then paint and sand the entire frame for an attractive appearance.
You'll need to insert the hooks or slots on the back of the majority of wall-mounted electric fireplaces into the brackets for mounting. Make sure that the slots or hooks are aligned prior to when connecting the fire to the wall brackets. Once the fire is in position you can then add additional elements like crystal embers or driftwood log pieces or decorative rocks.
2. Check the Bottom Bracket
The space above the mantel, fireplace or chimney breast is ideal for hanging artwork. There is a fine balance between an artistic arrangement and one that doesn't detract from the overall look of the fireplace.
Generally speaking, the rule of the thumb is that a painting should be around 80 percent of the width of the fireplace or mantel it is placed above. This will help it to be proportional and appear pleasing on the wall. Other decorative and ornamental items placed on the mantel could also influence this size & proportional guidelines.
If you're going to hang an image above your electric fireplace, it's crucial that the frame is made of glass or other material that is able to withstand high temperatures. If you're unsure then a quick test using a heat-sensitive cloth should reveal whether the frame is suitable for this kind of installation.
A common concern with hanging pictures over the fireplace is the possibility of causing damage to the artwork by smoke or stray heat. This is not an issue with gas or wood-powered fireplace. However when you are planning to use an electric wall fire, it's important to check the instructions provided by the manufacturer.
Most electric fires are equipped with an installation bracket that can be attached to the wall with hanging screws or wall-mounted fixing systems. If the latter, it's recommended that you drill exploratory holes into a discrete part of the wall prior to when you attempt to mount your electric fire. After that you can use a cable finder and pipe to ensure that there are no pipes or cables within the vicinity of the location you've chosen to mount it.
If you have a problem the electrical sockets, you can decide to place your fire over the electrical socket, or move it to a different spot. If you choose to move it to a new spot, you'll need to ensure that the power cable can be able to connect from the fire to the electrical socket. this is particularly important for older houses or homes with solid walls. In the event that it doesn't the electric fire won't perform as it should. Some models have a template included that will show you where to drill holes to make the holes Some require a spirit level and pencil to mark the appropriate spots on your wall.
3. Connect the Power Cord
If you've put in a recessed electric fireplace, you may need to move the plug socket away from the wall to behind the fireplace. This can give it a cleaner appearance. Be sure to test the fireplace prior to doing this to ensure that everything is working just as it should.
A third popular way to mount an electric fireplace is to frame space and build it into the wall. This gives you a traditional style, a polished look, and allows for a mantel. The owner's manual for your particular model will give information on framing, wiring, and securing the fire.
The position of your new electric fireplace on the wall with a marker or pencil. Use a carpenter's level to make sure that the area of installation is level and flat. You can use a studfinder mark the location so you can be sure you're drilling in a safe location.
Make use of your electric drill after having marked the installation location to make holes for bracket screws or hanging screws. Make sure you follow the exact instructions in your owner's manual for this procedure, especially when you're installing the fireplace in drywall. If you are unsure what to do then you can ask an expert for assistance.
You can also conceal power cords from view by using cable organizer kits. These kits usually include sleeves, clips, or boxes that can be used to bundle cables. You can also use wire snake tools to guide the cables through the wall. If you don't want to cut into the wall, a powerbridge kit will provide a cleaner and more secure connection.
You can also camouflage cords with paintable wire covers or by tacking them to the wall. Be sure to keep the cover or tacks away from the source of heat however. This will avoid accidental contact and protect the cord.
4. Connect the adapter
A wall-mounted electric fireplace is a great option for home renovations or for those who do not have the space or money to put in a gas fireplace. They are easy to install and can be used right from the box. They can be a great alternative for those seeking a modern and stylish touch or the warmth a fire provides. They can be hung on any wall like artwork, and they're electric with fan-powered heat.
Before you begin the actual installation process, it's a good idea to gather all the tools and equipment you'll need. Go through the user's manual for specific information about how to install your electric fire. Some models will require you to screw the brackets directly onto the wall. click to find out more may have an adjustable mounting plate that can slide into slots or hooks that attach to the brackets used for mounting. It is essential to remove all combustible materials from the area where you will be installing a recessive unit. In general, these materials should be kept 3 feet from the front side of the fireplace and 1.5 feet from its sides.
After you have checked all parts, plug in your electric fireplace and make sure it is working. This is a very important step since it will ensure that the flame effect screen and heater work in the way you intended. This will give you a good idea of the final product's final position.
Once you're satisfied that your electric fire is operating properly, you must think about covering the power cord. This will keep the finished product neat. You can do this by using paintable wire covers or install a new outlet that will allow you to tuck the cord behind the unit. This will provide seamless finishing to your fireplace.